Showing 4921–4960 of 12744 results
-
Marine Navigation LightsCoastal Pauluhn 6” Glass Globes
Coastal Pauluhn 6” Glass Globes
COASTAL ELECTRIC SUPPLY, L.L.C
(0 reviews)$16.32 Add to cart -
Marine Navigation LightsHubbell Wall Mount. Non-Metallic Vapor proof Incandescent Fixture
Hubbell Wall mount. Non-Metallic Vaportight Incandescent t Fixture
• Wall mount.
• UV resistant, gray, glass filled
thermoplastic polyester box,
mounting adapters and globe guards.
• Excellent temperature operating range 398215
of -40° F (-40° C) to +150° C.
• Heat resistant glass globe withstands thermal shock.
• High strength protective globe guard.
• UL listed including UL 1571 and UL 595.
• Accepts up to 150 watt type A incandescent bulb.
• Note: Bulb not included.
• Includes: Fixture, mounting box, guard and heat resistant glass globe• Brand : HUBBELL WIRING SYSTEM
(0 reviews)$218.41 Add to cart -
Marine Navigation LightsHubbell Ceiling mount Non-Metallic Vaportight Incandescent t Fixture
Hubbell Ceiling mount Non-Metallic Vaportight Incandescent t Fixture
• Ceiling mount.
• UV resistant, gray, glass filled
thermoplastic polyester box,
mounting adapters and globe guards.
• Excellent temperature operating range 398215
of -40° F (-40° C) to +150° C.
• Heat resistant glass globe withstands thermal shock.
• High strength protective globe guard.
• UL listed including UL 1571 and UL 595.
• Accepts up to 150 watt type A incandescent bulb.
• Note: Bulb not included.
• Includes: Fixture, mounting box, guard and heat resistant glass globe• Brand : HUBBELL WIRING SYSTEM
(0 reviews)$159.59 Add to cart -
Marine Navigation LightsPerko Fig. 342 Clear Medium Prefocus Bulbs (0342 004 CLR) 120 volt 60 wat
Perko Fig. 342 Clear Medium Prefocus Bulbs (0342 004 CLR) 120 volt 60 wat
• Clear.
• Sold each. Standard pack 25• Brand : PERKO
(0 reviews)$57.45 Add to cart -
Marine Navigation LightsPerko Double Contact Bayonet Bulbs (0374 004 CLR) 120 volt
Perko Double Contact Bayonet Bulbs (0374 004 CLR) 120 volt
• Clear Type T-8. C-8.
• Filament, length 1-3/8”.
• Sold each. Standard pack 50.• Brand : PERKO
(0 reviews)$57.45 Add to cart -
Marine Navigation LightsPerko Medium Prefocus Socket (0347 A00)
Perko Medium Prefocus Socket ((0347 A00)
• Phenolic – 250 volts – 1,000 watts.
• Overall height 1-7/8”. Overall diameter 1-1/2”.
• Supplied with metal mounting cap tapped for 3/8” I.P.S.• Brand : PERKO
(0 reviews)$87.04 Add to cart -
Marine Navigation LightsPerko1151 Series Navigation Masthead (Color White Masthead)
Perko1128 Series Navigation Masthead (Color White Masthead)
• Black polymer.
• Medium prefocus socket.
• Watertight terminal tube for 16/3-SO cable.
• Watertight access cap for rebulbing and cleaning.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Uses 1/4” fasteners.
• Bulb: 120 volt only (Not included)• Height overall: 11-1/2”, height lens: 6-3/4”
• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Brand : PERKO
(0 reviews)$227.85 Add to cart -
Marine Navigation Lights
Perko1129 Series Navigation Stern Light (Color White Masthead)
Perko1129 Series Navigation Stern Light (Color White Masthead)
• Black polymer.
• Medium prefocus socket.
• Watertight terminal tube for 16/3-SO cable.
• Watertight access cap for rebulbing and cleaning.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Uses 1/4” fasteners.
• Bulb: 120 volt only (Not included)• Height overall: 11-1/2”, height lens: 6-3/4”
• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Brand : PERKO
(0 reviews)$228.81 Add to cart -
Marine Navigation Lights
Perko1152 Series Navigation Stern Light (Color White Masthead)
Perko1152 Series Navigation Stern Light (Color White Masthead)
• Sheet metal, preprimed galvanized steel.
• Medium prefocus socket.
• Watertight terminal tube for 16/3-SO cable.
• Watertight access cap for rebulbing and cleaning.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Uses 1/4” fasteners.
• Bulb: 120 volt only (Not included)• Height overall: 11-1/2”, height lens: 6-3/4”
• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Brand : PERKO
(0 reviews)$800.39 Add to cart -
Marine Navigation Lights
Perko1151 Series Navigation Masthead (Color White Masthead)
Perko1151 Series Navigation Masthead (Color White Masthead)
• Sheet metal, preprimed galvanized steel.
• Medium prefocus socket.
• Watertight terminal tube for 16/3-SO cable.
• Watertight access cap for rebulbing and cleaning.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Uses 1/4” fasteners.
• Bulb: 120 volt only (Not included)• Height overall: 11-1/2”, height lens: 6-3/4”
• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Brand : PERKO
(0 reviews)$800.40 Add to cart -
Marine Navigation LightsPerko1127 Series Sidelight Navigation (Color Green )
Perko1127 Series Sidelight Navigation (Color Green )
• Sheet metal, preprimed galvanized steel.
• Medium prefocus socket.
• Watertight terminal tube for 16/3-SO cable.
• Watertight access cap for rebulbing and cleaning.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Uses 1/4” fasteners.
• Bulb: 120 volt only (Not included)• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Height overall: 11-1/2”, height lens: 6-3/4”
• Series: 1150, 1151 and 1152 Navigation Lights
• Brand : PERKO
(0 reviews)$225.03 Add to cart -
Marine Navigation LightsPerko1127 Series Sidelight Navigation (Color Red )
Perko1127 Series Sidelight Navigation (Color Red )
• Sheet metal, preprimed galvanized steel.
• Medium prefocus socket.
• Watertight terminal tube for 16/3-SO cable.
• Watertight access cap for rebulbing and cleaning.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Uses 1/4” fasteners.
• Bulb: 120 volt only (Not included)• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Height overall: 11-1/2”, height lens: 6-3/4”
• Series: 1150, 1151 and 1152 Navigation Lights
• Brand : PERKO
(0 reviews)$241.15 Add to cart -
Marine Navigation Lights
Perko1150 Series Sidelight Navigation (Color Red )
Perko1150 Series Sidelight Navigation (Color Red )
• Sheet metal, preprimed galvanized steel.
• Medium prefocus socket.
• Watertight terminal tube for 16/3-SO cable.
• Watertight access cap for rebulbing and cleaning.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Uses 1/4” fasteners.
• Bulb: 120 volt only (Not included)• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Height overall: 11-1/2”, height lens: 6-3/4”
• Series: 1150, 1151 and 1152 Navigation Lights
• Brand : PERKO
(0 reviews)$738.11 Add to cart -
Marine Navigation Lights
Perko1150 Series Sidelight Navigation (Color Green )
Perko1150 Series Sidelight Navigation (Color Green )
• Sheet metal, preprimed galvanized steel.
• Medium prefocus socket.
• Watertight terminal tube for 16/3-SO cable.
• Watertight access cap for rebulbing and cleaning.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Uses 1/4” fasteners.
• Bulb: 120 volt only (Not included)• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Height overall: 11-1/2”, height lens: 6-3/4”
• Series: 1150, 1151 and 1152 Navigation Lights
• Brand : PERKO
(0 reviews)$1,194.29 Add to cart -
Marine Navigation LightsPerko1130 Series Navigation All Round(Color White Masthead)
Perko1130 Series Navigation All Round(Color White Masthead)
• Black polymer.
• Pre-wired double contact socket and 3’ of 16/3-SO cable.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Height overall: 7-1/2”, height lens: 4-1/2”.
• Uses 1/4” fasteners
• Bulbs: 12, 24, 32 or 120 volt (Not included). Use Perko Fig. 374 Double Contact Bayonet Bulbs
*White lights have grey tinted lens.
• Watertight access cap for rebulbing and cleaning
• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Brand : PERKO
(0 reviews)$223.40 Add to cart -
Marine Navigation LightsPerko1130 Series Navigation Masthead (Color White Masthead)
Perko1130 Series Navigation Masthead (Color White Masthead)
• Black polymer.
• Pre-wired double contact socket and 3’ of 16/3-SO cable.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Height overall: 7-1/2”, height lens: 4-1/2”.
• Uses 1/4” fasteners
• Bulbs: 12, 24, 32 or 120 volt (Not included). Use Perko Fig. 374 Double Contact Bayonet Bulbs
*White lights have grey tinted lens.
• Watertight access cap for rebulbing and cleaning
• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Brand : PERKO
(0 reviews)$227.85 Add to cart -
Marine Navigation LightsPerko 1130 Series Navigation Sidelight (Color Red )
Perko 1130 Series Navigation Sidelight (Color Red)
• Black polymer.
• Pre-wired double contact socket and 3’ of 16/3-SO cable.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Height overall: 7-1/2”, height lens: 4-1/2”.
• Uses 1/4” fasteners
• Bulbs: 12, 24, 32 or 120 volt (Not included). Use Perko Fig. 374 Double Contact Bayonet Bulbs
*White lights have grey tinted lens.
• Watertight access cap for rebulbing and cleaning
• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Brand : PERKO
(0 reviews)$241.14 Add to cart -
Marine Navigation LightsPerko 1130 Series Navigation Sidelight (Color Green)
Perko 1130 Series Navigation Sidelight (Color Green)
• Black polymer.
• Pre-wired double contact socket and 3’ of 16/3-SO cable.
• UL Standard 1104, 72 COLREGS and US inland rules.
• Height overall: 7-1/2”, height lens: 4-1/2”.
• Uses 1/4” fasteners
• Bulbs: 12, 24, 32 or 120 volt (Not included). Use Perko Fig. 374 Double Contact Bayonet Bulbs
*White lights have grey tinted lens.
• Watertight access cap for rebulbing and cleaning
• FOR USE ON VESSELS 20 METERS TO 50 METERS IN LENGTH
• Brand : PERKO
(0 reviews)$225.02 Add to cart -
Industrial CableSeastar Solution Vernier Head Only
Seastar Solution Vernier Head Only
(0 reviews)$72.97 Add to cart -
Industrial CableDometic 33LV Vernier Control Cables Length 10’
Dometic 33LV Vernier Control Cables Length 10’
• Great for throttles or other applications where precise control is desired.
• Push the button for fast easy setting of approximate position, then turn
the knob for micro adjustment.
• Positive, adjustable brake maintains settings regardless of vibration or
governor back pressure.
• HDPE outer casing for durability and best resistance to UV and chemicals(0 reviews)$55.74 Add to cart -
Industrial Cable
Dometic 33LV Vernier Control Cables Length 5’
Dometic 33LV Vernier Control Cables Length 5’
• Great for throttles or other applications where precise control is desired.
• Push the button for fast easy setting of approximate position, then turn
the knob for micro adjustment.
• Positive, adjustable brake maintains settings regardless of vibration or
governor back pressure.
• HDPE outer casing for durability and best resistance to UV and chemicals(0 reviews)$46.79 Add to cart -
Rubber BearingJohnson 6”x 7-1/2” x 24” Cutless Naval Brass Sleeve Bearings
Johnson 6”x 7-1/2” x 24” Cutless Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 6
B:Outside Diameter (inches): 7 and 1/2
C:Length (inches): 24
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$2,105.77 Add to cart -
Rubber Bearing
Johnson 5-3/4” x 7” x 23 Cutless Naval Brass Sleeve Bearings
Johnson 5-3/4” x 7” x 23 Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 5 and 3/4
B:Outside Diameter (inches): 7
C:Length (inches): 23
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$2,161.25 Add to cart -
Rubber Bearing
Johnson 5-1/2” x 7” x 22” Cutless Naval Brass Sleeve Bearings
Johnson 5-1/2” x 7” x 22” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 5 and 1/2
B:Outside Diameter (inches): 7
C:Length (inches): 22
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$1,884.81 Add to cart -
Rubber Bearing
Johnson 5” x 6-1/2” x 20”Cutless Naval Brass Sleeve Bearings
Johnson 5” x 6-1/2” x 20” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 5
B:Outside Diameter (inches): 6 and 1/2
C:Length (inches): 20
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$1,444.81 Add to cart -
Rubber Bearing
Johnson 5” x 6-1/8”x 20”Cutless Naval Brass Sleeve Bearings
Johnson 5” x 6-1/8”x 20” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 5
B:Outside Diameter (inches): 6 and 1/8
C:Length (inches): 20
G:Metal Thickness (inches): 1/4• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$1,339.53 Add to cart -
Rubber Bearing
Johnson 4-1/2”x 5-3/4” x 18” Cutless Naval Brass Sleeve Bearings
Johnson 4-1/2”x 5-3/4” x 18” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 4 and 1/2
B:Outside Diameter (inches): 5 and 3/4
C;Length (inches): 18
G:Metal Thickness (inches): 3/16• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$997.50 Add to cart -
Rubber Bearing
Johnson 4-1/2” x 5-1/2” x 18” Cutless Naval Brass Sleeve Bearings
Johnson 4-1/2” x 5-1/2” x 18” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 4 and 1/2
B:Outside Diameter (inches): 5 and 1/2
C:Length (inches): 18
G:Metal Thickness (inches): 3 1/6• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$938.77 Add to cart -
Rubber Bearing
Johnson 4”x 5-1/4” x 16 Cutless Naval Brass Sleeve Bearings (Copy)
Johnson 4”x 5-1/4” x 16 Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 4
B:Outside Diameter (inches): 5 and 1/4
C:Length (inches): 16
G:Metal Thickness (inches): 3 and 1/6• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$792.00 Add to cart -
Rubber Bearing
Johnson 4” x 5” x 16”Cutless Naval Brass Sleeve Bearings
Johnson 4” x 5” x 16” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 4
B:Outside Diameter (inches): 5
C:Length (inches): 16
G:Metal Thickness (inches): 3 and 1/6• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$728.70 Add to cart -
Rubber Bearing
Johnson 3-5/8” x 4-1/2” x14-1/2” Cutless Naval Brass Sleeve Bearings
Johnson 3-5/8” x 4-1/2” x14-1/2” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 3 and 5/8
B:Outside Diameter (inches): 4 and 1/2
C:Length (inches): 14 and 1/2
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$697.13 Add to cart -
Rubber Bearing
Johnson 3-1/2”x 4-1/2” x 14”Cutless Naval Brass Sleeve Bearings
Johnson 3-1/2”x 4-1/2” x 14” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 3 and 1/2
B:Outside Diameter (inches): 4 and 1/2
C:Length (inches): 14
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$480.27 Add to cart -
Rubber Bearing
Johnson 3-1/2”x 4-1/4” x 14 Cutless Naval Brass Sleeve Bearings
Johnson 3-1/2”x 4-1/4” x 14 Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 3 and 1/2
B:Outside Diameter (inches): 4 and 1/4
C:Length (inches): 14
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$474.71 Add to cart -
Rubber Bearing
Johnson 3”x 4”x 12″ Cutless Naval Brass Sleeve Bearings
Johnson 3”x 4”x 12″ Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 3
B:Outside Diameter (inches): 3 and 3/4
C:Length (inches): 12
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$313.76 Add to cart -
Rubber Bearing
Johnson 3”x 3-3/4” x 12” Cutless Naval Brass Sleeve Bearings
Johnson 3”x 3-3/4” x 12” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 2 and 3/4
B:Outside Diameter (inches): 3 and 3/8
C:Length (inches): 11
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$363.36 Add to cart -
Rubber Bearing
Johnson 2-3/4” x 3-3/4” x 11” Cutless Naval Brass Sleeve Bearings
Johnson 2-3/4” x 3-3/4” x 11” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 2 and 3/4
B:Outside Diameter (inches): 3 and 3/4
C:Length (inches): 11
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$300.30 Add to cart -
Rubber Bearing
Johnson 2-3/4” x 3-3/8” x 11” Cutless Naval Brass Sleeve Bearings
Johnson 2-3/4” x 3-3/8” x 11” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 2 and 1/4
B:Outside Diameter (inches): 3 and 1/8
C:Length (inches): 9
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$369.58 Add to cart -
Rubber Bearing
Johnson 2-1/2” x 3-3/8” x 10” Cutless Naval Brass Sleeve Bearings
Johnson 2-1/2” x 3-3/8” x 10” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 2 and 1/2
B:Outside Diameter (inches): 3 and 3/8
C:Length (inches): 10
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$296.59 Add to cart -
Rubber Bearing
Johnson 2-1/2 x 3-1/8” x 10” Cutless Naval Brass Sleeve Bearings
Johnson 2-1/2 x 3-1/8” x 10” Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 2 and 1/2
B:Outside Diameter (inches): 3 and 1/8
C:Length (inches): 10
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$295.06 Add to cart -
Rubber Bearing
Johnson 2-1/4”x 3-1/8” x 9″ Cutless Naval Brass Sleeve Bearings
Johnson 2-1/4”x 3-1/8” x 9″ Cutless ® Naval Brass Sleeve Bearings
Picture Dimensions of Able Cutlass Bearing
A:Shaft Diameter (inches): 2 and 1/4
B:Outside Diameter (inches): 3 and 1/8
C:Length (inches): 9
G:Metal Thickness (inches): 1/8• These bearings adapt equally well to strut and stern tube mounts, and are
often used effectively as rudder-stock and pintle bushings.
• Bearing diameters are precision fitted to the designated shaft size with
the correct clearance for efficient water lubrication.
• External brass shells are machined and polished to provide easy fitting.
• Specially formulated oil and chemical resistant nitrile rubber is securely
bonded to the shell.
• Units with thin shells are available for the struts of small craft.
• Sleeve bearings are usually installed by light press-fitting and locked in
place with cone-pointed set screws.
• PRECAUTION: When shrink fitting of the bearing is required, chilling
must be achieved by gradual cooling to not more than minus 20° F (-28°
C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
shocking the bearing while in the chilled state could cause the rubber to
separate from the shell.Metallic Rubber Bering
Brand: Duramax Marine LLC
(0 reviews)$253.03 Add to cart
