Electrical
Showing 41–64 of 64 results
-
Oil PressureMurphy Electric Pressure Gage 0-100 PSI (12VDC)
Murphy Electric Pressure Gage 0-100 PSI (12VDC)
Additional Information:
-Power Input: 12 VDC
-Bezel: Polished 316 stainless steel
-Lens: Clear Polycarbonate and UV stabilized
-Air Core Movement: Silicon dampened pointer
-Wiring: Plug connector with wire leads, 18 AWG (1.0 mm2), 8 in. (203 mm) long
-Operating Temperature: -40 to 185°F (-40 to +85°C)(0 reviews)$53.89 Add to cart -
Oil PressureMurphy Electric Pressure Gage 0-80 PSI (12 VDC)
Murphy Electric Pressure Gage 0-80 PSI(12VDC)
Additional Information:
-Range Scale: 80 psi (552 kPa) [5.52 bar]
-Power Input: 12 VDC
-Bezel: Polished 316 stainless steel
-Lens: Clear Polycarbonate and UV stabilized
-Wiring: Plug connector with wire leads, 18 AWG (1.0 mm2), 8 in. (203 mm) long
-Operating Temperature: -40 to 185°F (-40 to +85°C)(0 reviews)$71.59 Add to cart -
Water TemperatureMurphy Annunciators and Magnetic Switch -24V
FW Murphy Annunciators and Magnetic Switch 24V
Additional Information:
-Allows for Swichgage and/or N.C. contacts to be wired “Closed Loop”.
-Any contact open or Swichgage contact close in the circuit shunt trips the 24 volt.(0 reviews)$92.58 Add to cart -
Oil PressureSAH Murphy Mini Siren 6/28 VDC
SAH Murphy Mini Siren 6/28 VDC
Additional Information:
-Murphy Part No.: SH
-ype: PIEZO electric transducer
-Operating Voltage: 6–28 VDC
-Output Level: at 28 VDC 1 meter, 90± 5 dB
-Current Drain: at 28 VDC, 20 mA MAX
-Mounting Hole: 1-1/8 in. (29 mm) diameter
-Maximum Panel Thickness: 1/8 in. (3 mm)(0 reviews)$78.99 Add to cart -
Oil PressureVDO 400 PSI Electric Transmission Oil Pressure Gauge 12V
VDO 400 PSI Electric Transmission Oil Pressure Gauge 12V
Additional Information:
-VDO Part No. :350 290
-Diameter 2 1/16 in
-Diameter (Metric) 52mm
-Dial Scale Single
-Input Type analog
-Connection .250″ Spade
-Mounting Hardware Spin-Lok™
-Voltage 12V
Sender Use: 362 004(0 reviews) -
Oil PressureVDO Pressure Sender 400 PSI 12V/24
VDO Pressure Sender 400 PSI 12V/24
Additional Information:
-VDO Part No. :362 004
-Ground Floating
-Connection Knurled Nut
-Voltage 6-24V(0 reviews) -
Oil PressureVDO Pressure Sender 150 PSI 12V/24
VDO Pressure Sender 150 PSI 12V/24
Additional Information:
-VDO Part No. :360 021
-Ground Standard
-Connection Knurled Nut
-Voltage 6-24V
-Connection-1/4-18NPT(0 reviews) -
Oil PressureVDO 150 PSI Electric Oil Pressure Gauge 12V
VDO 150 PSI Electric Oil Pressure Gauge 12V
350Additional Information:
-Part No. :350 198
-Diameter (Metric) 52mm
-Max Range Outer Scale 150 PSI
-Diameter 2 1/16 in
-Input Type analog
-Voltage 12V
-Dial Scale Single
-Sender Use: 360 021(0 reviews) -
Oil PressureVDO Pressure Sender 80 PSI 12V/24
VDO Pressure Sender 80 PSI 12V/24V
Additional Information:
-VDO Part No.:360 003
-Ground Standard
-Connection Knurled Nut
-Voltage 6-24V
-Thread: 1/8-27 NPTF
-Max. Pressure Scale: 80PSI / 5 bar (10-180Ohm)(0 reviews) -
Oil PressureVDO 80 PSI Electric Oil Pressure Gauge 12V
VDO 80 PSI Electric Oil Pressure Gauge 12V
Additional Information:
-VDO Part No.: 350 194
-Diameter (Metric) 52mm
-Max Range Outer Scale 80 PSI
-Diameter 2 1/16 in
-Sender Use: 360 003
-Input Type analog
-Voltage 12V
-Dial Scale Single(0 reviews) -
FuelVDO ALAS Adjustable Fuel Sender
VDO Part No.: 226 007
Additional Information:
-Voltage: 6-24V
-Connection: M4 StudThis Alas Sender 226 007 is Used with Fuel Gauge VDO # 301 302
(0 reviews) -
Water LevelMurphy Level Indicator Swichgage with Snap-Switch for Engine
Murphy Level Indicator Swichgage with Snap-Switch for Engine
Additional Information
-Murphy Part No.: EL150K1
-Case: Die cast aluminum, poly-urethane coated; approximate dimensions; 5 x 4-3/4 x 2-3/4 in. (127 x 121 x 70 mm)
-Mounting Holes: (2) 9/32 in. (7 mm) diameter at 4-1/2 in. (114 mm) on center
-Float: Brass
-Lens: Polycarbonate
-Snap-Switch: SPDT rated 10 A @ 125 VAC; 0.5 A @ 125 VDC; 10 A 30 VDC
-Wire: (3) 18 AWG x 14 in. (1 mm2 x 356 mm)(0 reviews)$228.99 Add to cart -
AmmeterMurphy Ammeter, 0-60 Amp 12 Volt / 24 Volt
Murphy Ammeter, 0-60 Amp 12 Volt -& 24 volt
Model: 60060(0 reviews)$68.19 Add to cart -
HourmeterHourmeter 12/24V
Hourmeter 12/24V
Additional Information
Hourmeter has a 2 inch (51 mm) diameter dial, is a 6-digits Hourmeter ,Bright Stainless Steel Bezel(0 reviews)$120.50 Add to cart -
VoltmeterMurphy Voltmeter Gauge 24 VDC
Murphy Voltmeter Gauge 24 VDC
Additional Information-Range Scale: 8-18V
-Power Input: 24 VDC
-Dial: Black with white markings; back-lite (marking becomes red when illuminated
-Wiring: Plug connector with wire leads, 18 AWG (1.0 mm2), 8 in. (203 mm) long
-Operating Temperature: -40 to 185°F (-40 to +85°C)(0 reviews)$55.39 Add to cart -
VoltmeterVDO Vision Black 12V Voltmeter
VDO Vision Black 12V Voltmeter
Additional Information
-VDO Part No.:332-103
-Input Type analog
-Diameter 2 1/16 in
-Connection .250″ Spade
-Mounting Hardware Spin-Lok™
-Voltage 12V
-Diameter (Metric) 52mm
-Max Range Outer Scale 16V(0 reviews) -
VoltmeterVDO Vision Chrome 12V Voltmeter
VDO Vision Chrome 12V Voltmeter
Additional Information
-VDO Part No.:332-193
-Input Type analog
-Diameter 2 1/16 in
-Connection .250″ Spade
-Mounting Hardware Spin-Lok™
-Voltage 12V
-Diameter (Metric) 52mm
-Max Range Outer Scale 16V(0 reviews) -
Oil PressureFW Murphy Annunciators and Magnetic Switch 518APH-12V
FW Murphy Annunciators and Magnetic Switch 518APH-12V
Additional Information:
• Allows for Swichgage and/or N.C. contacts to be wired “Closed Loop”.
• Any contact open or Swichgage contact close in the circuit shunt trips the
518APH.
• 12 volt.(0 reviews)$116.39 Add to cart -
Oil PressureOil Pressure Switch For Detroit Diesel & Cummins
Oil Pressure Switch For Detroit Diesel & Cummins 20 PSI with 1/8 NPT
(0 reviews)$37.22 Add to cart -
Oil PressureOil Pressure Switch For Detroit Diesel & Cummins
Oil Pressure Switch For Detroit Diesel & Cummins 10 PSI with 1/8 NPT
(0 reviews)$46.16 Add to cart -
Oil PressureOil Pressure Switch For Detroit Diesel & Cummins
Oil Pressure Switch For Detroit Diesel & Cummins 05 PSI with 1/8 NPT
(0 reviews)$36.16 Add to cart -
Instrumental PanelCole Hersee Push Button Switch
Cole Hersee Push Button Switch
• Brass case.
• Rated: 35 amps at 12V DC.
• Two brass screw terminals.
• Brass mounting stem 5/8”-32, 1-3/8” long.
• Fits panels up to 1” thick.
• Silver contacts.
• 2 positions: Momentary, normally Off, push to On.
• With recessed facenut, designed to prevent accidental actuation.(0 reviews)$21.96 Add to cart -
Instrumental PanelCole Hersee Push Button Switch with Cap
Cole Hersee Push Button Switch with Cap
• Brass case.
• Rated: 35 amps at 12V DC.
• Two brass screw terminals.
• Brass mounting stem 5/8”-32, 1-3/8” long.
• Fits panels up to 1” thick.
• Silver contacts.
• 2 positions: Momentary, normally Off, push to On.
• With snap-on black rubber cap.”(0 reviews)$27.39 Add to cart -
Instrumental PanelMurphy Stainless Gage Panel
Murphy Stainless Steel Five-Hole Gage Panel
-One 3-7/16 in. (87 mm) diameter hole
-Four 2-1/16 in. (52 mm) diameter holes
-One 3/4 in. (19 mm) diameter hole(0 reviews)$138.50 Add to cart