Johnson 5-1/2” x 7” x 22” Cutless Naval Brass Sleeve Bearings

Related products

• 

  • 
  • 

  Rubber Bearing

  Johnson 3/4″ x 1 1/4″ x 3″ Cutless Naval Brass Sleeve Bearings

  Johnson 3/4″ x 1 1/4″ x 3″ Cutless ® Naval Brass Sleeve Bearings

  Picture Dimensions of Able Cutlass Bearing

  A :Shaft Diameter (inches): 3/4
  B:Outside Diameter (inches): 1 and 1/4
  C:Length (inches): 3
  G:Metal Thickness (inches): 1/8

  • These bearings adapt equally well to strut and stern tube mounts, and are
  often used effectively as rudder-stock and pintle bushings.
  • Bearing diameters are precision fitted to the designated shaft size with
  the correct clearance for efficient water lubrication.
  • External brass shells are machined and polished to provide easy fitting.
  • Specially formulated oil and chemical resistant nitrile rubber is securely
  bonded to the shell.
  • Units with thin shells are available for the struts of small craft.
  • Sleeve bearings are usually installed by light press-fitting and locked in
  place with cone-pointed set screws.
  • PRECAUTION: When shrink fitting of the bearing is required, chilling
  must be achieved by gradual cooling to not more than minus 20° F (-28°
  C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
  shocking the bearing while in the chilled state could cause the rubber to
  separate from the shell.

  Metallic Rubber Bering

  Brand:  Duramax Marine LLC

   

  (0 reviews)

  $74.69 Add to cart
• 

  • 
  • 

  Rubber Bearing

  Johnson 1”x 2”x 4 Cutless Naval Brass Sleeve Bearings

  Johnson 1”x 2”x 4 Cutless ® Naval Brass Sleeve Bearings

  Picture Dimensions of Able Cutlass Bearing

  A:Shaft Diameter (inches): 1
  B:Outside Diameter (inches): 2
  C:Length (inches): 4
  G:Metal Thickness (inches): 1/8

  • These bearings adapt equally well to strut and stern tube mounts, and are
  often used effectively as rudder-stock and pintle bushings.
  • Bearing diameters are precision fitted to the designated shaft size with
  the correct clearance for efficient water lubrication.
  • External brass shells are machined and polished to provide easy fitting.
  • Specially formulated oil and chemical resistant nitrile rubber is securely
  bonded to the shell.
  • Units with thin shells are available for the struts of small craft.
  • Sleeve bearings are usually installed by light press-fitting and locked in
  place with cone-pointed set screws.
  • PRECAUTION: When shrink fitting of the bearing is required, chilling
  must be achieved by gradual cooling to not more than minus 20° F (-28°
  C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
  shocking the bearing while in the chilled state could cause the rubber to
  separate from the shell.

  Metallic Rubber Bering

  Brand:  Duramax Marine LLC

   

  (0 reviews)

  $105.13 Add to cart
• 

  • 
  • 

  Rubber Bearing

  Johnson 1”x 1-5/8”x4” Cutless Naval Brass Sleeve Bearings

  Johnson 1”x 1-5/8”x4” Cutless ® Naval Brass Sleeve Bearings

  Picture Dimensions of Apex Cutlass Bearing

  A:Shaft Diameter (inches): 1
  B:Outside Diameter (inches): 1 and 5/8
  C:Length (inches): 4
  G:Metal Thickness (inches): 1/8

  • These bearings adapt equally well to strut and stern tube mounts, and are
  often used effectively as rudder-stock and pintle bushings.
  • Bearing diameters are precision fitted to the designated shaft size with
  the correct clearance for efficient water lubrication.
  • External brass shells are machined and polished to provide easy fitting.
  • Specially formulated oil and chemical resistant nitrile rubber is securely
  bonded to the shell.
  • Units with thin shells are available for the struts of small craft.
  • Sleeve bearings are usually installed by light press-fitting and locked in
  place with cone-pointed set screws.
  • PRECAUTION: When shrink fitting of the bearing is required, chilling
  must be achieved by gradual cooling to not more than minus 20° F (-28°
  C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
  shocking the bearing while in the chilled state could cause the rubber to
  separate from the shell.

  Metallic Rubber Bering

  Brand:  Duramax Marine LLC

   

  (0 reviews)

  $81.46 Add to cart
• 

  • 
  • 

  Rubber Bearing

  Johnson) 1-3/4”x 2-3/8 ”x 7” Cutless Naval Brass Sleeve Bearings

  Johnson 1-3/4”x 2-3/8 ”x 7”  Cutless ® Naval Brass Sleeve Bearings

  Picture Dimensions of Able Cutlass Bearing

  A:Shaft Diameter (inches): 1 and 3/4
  B:Outside Diameter (inches): 2 and 3/8
  C:Length (inches): 7
  G:Metal Thickness (inches): 1/8

  • These bearings adapt equally well to strut and stern tube mounts, and are
  often used effectively as rudder-stock and pintle bushings.
  • Bearing diameters are precision fitted to the designated shaft size with
  the correct clearance for efficient water lubrication.
  • External brass shells are machined and polished to provide easy fitting.
  • Specially formulated oil and chemical resistant nitrile rubber is securely
  bonded to the shell.
  • Units with thin shells are available for the struts of small craft.
  • Sleeve bearings are usually installed by light press-fitting and locked in
  place with cone-pointed set screws.
  • PRECAUTION: When shrink fitting of the bearing is required, chilling
  must be achieved by gradual cooling to not more than minus 20° F (-28°
  C) using freezer or regular ice (DO NOT DRY ICE). NOTE: Pounding or
  shocking the bearing while in the chilled state could cause the rubber to
  separate from the shell.

  Metallic Rubber Bering

  Brand:  Duramax Marine LLC

   

  (0 reviews)

  $173.98 Add to cart